Adaptive External Roller Shutters – concealed and surface-mounted/roller shutters box made of aluminium/

Adaptive roller shutters are mounted in buildings with pre-mounted windows. But many our clients decide to mount these shutters for newly-erected houses or buildings where exchange of the windows is executed. We offer CONCEALED ADAPTIVE ROLLER SHUTTERS with two options of assembly and SURFACE-MOUNTED ADAPTIVE ROLLER SHUTTERS of an OVAL type. Characteristic feature of these systems are aluminium guides, housing and roller shutter box with a drain channel located outside the building.

1. SURFACE-MOUNTED ADAPTIVE ROLLER SHUTTERS of an OVAL type

INSTALLATION IN THE INSULATION LAYER

  • Roller shutter box 190 mm x 185 mm
  • Maximum height – 2520 mm (height measured together with the box)

System specification:

  • very easy assembly;
  • no negative effect on the energy balance of the building;
  • possible to mount in the already existing buildings;
  • Rigid structure – the entire unit is made of aluminium (the slats, guiding channels and a rigid cassette of pressed aluminium);
  • has a positive effect on the optics of the facade; the height of the cassette is 180 mm.

2. CONCEALED ADAPTIVE ROLLER SHUTTERS INTEGRO

MOUNTED TO THE FACE OF ELEVATION + STYROFOAM 200mm

  • Roller shutter box 180 mm x 180 mm
  • Maximum height – 2520 mm (height measured together with the box)

System specification:

  • possible to mount also in the already existing buildings, after appropriate adjustments are made in the lintel area, or less frequently in front of the window;
  • the entire unit is made of aluminium (the slats, guide rails and a rigid cassette of pressed aluminium);
  • provides optimal solutions for designers and developers;
  • INTEGRO system elements do not interfere with the window, door, or lintel structure (stiffness), thus they do not have any negative effect on the energy balance of the building;
  • the INTEGRO system allows a single roller blind type which is wound up outwardly (left-handed rotation);
  • an inspection flap is placed at the bottom (with external access);
  • cassette height – 180 mm; very easy assembly;

3. GUIDE CHANNELS in single and double execution

2-chamber straight guide

Straight guide

4. HOUSING – Lamele Aluprof PA 39

PA 39 profile is one of the most popular aluminium profiles. It is so popular that the shutters made of this profile has been used in European houses for years now. Its main features are small width and tapering shape. It rolls up perfectly and fits to even small boxes. Thanks to the foam filling the profile inside, it is well insulated in terms of temperatures and noise. Small weight allows for manual drive, spring drive or electric operation. PA 39 is offered as a perforated version or plain in wide range of colours similar to RAL palette. The profiles are durable in terms of colour and resistance to wear-off. The profile is also resistant to the impact of atmospheric conditions.
Aluminium profiles belong to products which are ecologically clean. The foam inside is free of freon compounds and the paints do not contain cadmium.

5. OPERATION OF EXTERNAL ROLLER SHUTTERS – options of use

Manual operation

Manual operation of roller shutter allows for winding up and down with the use of a retractor (pulling the tape or a rope) or a retractor with a crank handle. For external roller shutters each such option requires effort and time if it is used several times a day.

Electric operation

Electric operation. A drive – a very good quality of engine with mechanical limit switches – Motus Monos produced by NICE company. It has a noiseless gearshift and brakes.

Radio-operation

Radio-operation. A drive – an engine with in-built radio centre RolTop-868.

  • the engine with an in-built radio centre for external roller shutters with electric limit switches, surcharge, which while detecting an obstacle stops and reverses the motion of the roller shutter.
  • Intelligent system of detection: the engine adjusts power of action to the size of roller shutters.
  • Available setting of final position in a chosen place with the use of assembly cable or a remote controller.
  • Slower speed before reaching the position of opening and closing.
  • Silent brake (in engines of 3, 5, 8, 10,20 Nm).
  • Operating in two-direction radio-system.
  • Signals confirming the reception of a command by a receiver.
  • Routing system (transferring radio signal between engines), guarantees transfer of a signal from a remote control to the engine.

Available remote controls:

SoloTel2

1-channel REMOTE CONTROL with a wall handle, safe frequency of 868 Mhz.
Operating in a two-direction radio system. Signals confirming the reception of a command by a receiver.
Available simple programming and the use of two intermediate positions.

MonoTel2

1-channel REMOTE CONTROL with a magnetic wall handle, safe frequency of 868 Mhz.
Operating in a two-direction radio system. Signals confirming the reception of a command by a receiver.
Available simple programming and the use of two intermediate positions.

VarioTel2

5-channel REMOTE CONTROL with the function of central channel and with a magnetic wall handle, safe frequency of 868 Mhz.
Operating in a two-direction radio system.
Available simple programming and the use of two intermediate positions.
Manual/automatic switch included.

TempoTel2

10-channel REMOTE CONTROL with the possibility to make 2 groups + function of central channel. Clock function (opening and closing at certain times), holiday function (simulates the presence of house-holders).
Availability of programming.
Manual/automatic switch included for each channel of a remote control.

Scroll Up