EXTERIOR DOORS from PVC – Schüco profiles

The doors are made of high-impact, deformation-resistant PVC from the renowned company Schüco. Good thermal insulation is ensured by multi-chamber profiles, while steel reinforcements of a large size and optimal thickness contribute to the stiffness and stability of the product.

The structure of the profiles gives us the possibility of installing multi-point locks and reinforced locking elements. This type of solution ensures we obtain safe doors with a long service life. Our exterior doors made of PVC have a low aluminium threshold with a thermal break.

The door leaf filling consists of two sandwich panels made of plastic, separated by polyurethane foam, which ensures very good thermal insulation of the door. Door panels can be enriched with various types of glass and ornamental frames. The surface layer of PVC panels is covered with high-quality acrylic films or varnishes, resistant to weather conditions and UV rays. In addition to the models of door fillings presented in our galleries, we are happy to make doors according to your individual project.


OUR OFFER INCLUDES TWO TYPES OF DOOR PROFILES BY Schüco: Corona CT 70 i LivIng 82:

Schüco door sill cross-section – Corona CT 70

Schüco door sill cross-section – LivIng 82

Schüco DOOR – profil LivIng 82

Schüco LivIng are innovative systems for modern plastic doors.

  • The 6/7-chamber Schüco LivIng door system achieves excellent thermal insulation parameters with an installation depth of 82 mm.
  • The first weldable EPDM seal is integrated with the Schüco LivIng door system. By using a flexible, weldable material, a better sealing effect is achieved in the difficult corner area of ​​the element, while obtaining an elegant appearance as there is no seal hardening.
  • The Schüco LivIng system meets the individual requirements of investors in both private houses and large buildings, either new or modernized.
  • Schüco AutomotiveFinish glossy metallic shades as well as the Schüco UnlimitedFinish and Schüco TopAlu PVC film ranges are all available for colour selection.
  • We use modern silver gray seals in the white profiles of the Schüco LivIng system and black seals in the foiled profiles.
  • The Schüco LivIng plastic door system can be equipped with overlay fillings or door fillings to cover the leaf. This provides a lot of freedom in arranging individual entrance doors.

LivIng 82 ENTRANCE DOORS – opening outwards

Cross-section through the LivIng 82 door opening outwards

LivIng 82 ENTRANCE DOORS – opening inwards

Cross-section through the LivIng 82 door opening inwards

TECHNICAL INFORMATION

  • System mounting depth – 82 mm
  • Front width min. – 88 mm
  • Uf value (frame) – 1.1 W/(m²·K)
  • Glass / panel thickness min. – max. – 24 mm – 52 mm
  • Surface finish – Decorative foils / TopAlu / AutomotiveFinish
  • Air permeability – class 2
  • Water tightness – class 5A
  • Anti-burglary resistance – up to Rc2
  • Wind load resistance – klass C2/B2
  • Height max. – 2350 mm
  • Width max. – 1100 mm
  • Door sill – Automatic door sealing, Low collision-free door threshold made of glass-fibre reinforced plastic or aluminium, compliant with DIN 18025.

Schüco DOOR – profil CT 70

The universal Schüco Corona CT 70 AS system with good thermal insulation is an excellent series for modernised and new buildings as a system of internal and external sealing.

  • The basis of the Schüco Corona CT 70 system is a multi-chamber structure with an installation depth of 70 mm.
  • The small front widths provide a modern look, and two levels of sealing ensure good acoustic insulation of these elements and thus additional comfort for users.
  • We use silver grey seals in the white profiles of the Schüco Corona CT 70 system and black seals in the foiled profiles.
  • The system is also integrated into the Schüco colour concept with Schüco TopAlu, Schüco AutomotiveFinish and Schüco UnlimitedFinish.

CT70 ENTRANCE DOORS – opening outwards

Cross-section through the CT 70 door opening outwards

CT70 ENTRANCE DOORS – opening inwards

Cross-section through the CT 70 door opening inwards

TECHNICAL INFORMATION

  • System mounting depth – 70 mm
  • Front width min. – 88 mm
  • Uf value (frame) – 1.41 W/(m²·K)
  • Glass / panel thickness min. – max. – 24 mm – 40 mm
  • Surface finish – Decorative foils / TopAlu / AutomotiveFinish
  • Air permeability – class 2
  • Water tightness – class 5A
  • Anti-burglary resistance – up to Rc2
  • Wind load resistance – klass C2/B2
  • Height max. – 2300 mm
  • Width max. – 1100 mm
  • Door sill – Automatic door sealing, Low collision-free door threshold made of glass-fibre reinforced plastic or aluminium, compliant with DIN 18025.

PANEL STRIPS – types:

See door cross-sections in which different panel strips were used, depending on the thickness of the door filling used.

LivIng door profile with a 48 mm panel
LivIng door profile with a 36 mm panel

DOOR FILLINGS – types:

Door filling is a panel mounted in the frame of the door structure.

Door filling may be:

  • inset or overlay;
  • made of laminated boards or aluminium;
  • decorated with various frames, glass elements, inlays, cuttings or appliqués;
  • of any colour of your choice.

DOORS – INSET FILLING


DOORS – OVERLAY FILLING


ENTRANCE DOOR OPENING SYSTEMS:

Doorbell with camera and peephole
Door opening by entering code on numeric keyboard
Door opening system with fingerprint reader

Scroll Up