Accessories / Additions for Roller Shutters and Sun Protection Covers

1. OPERATION OF EXTERNAL ROLLER SHUTTERS – options of use


Manual operation

Manual operation of roller shutter allows for winding up and down with the use of a retractor (pulling the tape or a rope) or a retractor with a crank handle. For external roller shutters each such option requires effort and time if it is used several times a day.


Electric operation

Electric operation. A drive – a very good quality of engine with mechanical limit switches – Motus Monos produced by NICE company. It has a noiseless gearshift and brakes.


Radio-operation

Radio-operation. A drive – an engine with in-built radio centre RolTop-868.

  • the engine with an in-built radio centre for external roller shutters with electric limit switches, surcharge, which while detecting an obstacle stops and reverses the motion of the roller shutter.
  • Intelligent system of detection: the engine adjusts power of action to the size of roller shutters.
  • Available setting of final position in a chosen place with the use of assembly cable or a remote controller.
  • Slower speed before reaching the position of opening and closing.
  • Silent brake (in engines of 3, 5, 8, 10,20 Nm).
  • Operating in two-direction radio-system.
  • Signals confirming the reception of a command by a receiver.
  • Routing system (transferring radio signal between engines), guarantees transfer of a signal from a remote control to the engine.

Available remote controls:

SoloTel2

1-channel REMOTE CONTROL with a wall handle, safe frequency of 868 Mhz.
Operating in a two-direction radio system. Signals confirming the reception of a command by a receiver.
Available simple programming and the use of two intermediate positions.

MonoTel2

1-channel REMOTE CONTROL with a magnetic wall handle, safe frequency of 868 Mhz.
Operating in a two-direction radio system. Signals confirming the reception of a command by a receiver.
Available simple programming and the use of two intermediate positions.

VarioTel2

5-channel REMOTE CONTROL with the function of central channel and with a magnetic wall handle, safe frequency of 868 Mhz.
Operating in a two-direction radio system.
Available simple programming and the use of two intermediate positions.
Manual/automatic switch included.

TempoTel2

10-channel REMOTE CONTROL with the possibility to make 2 groups + function of central channel. Clock function (opening and closing at certain times), holiday function (simulates the presence of house-holders).
Availability of programming.
Manual/automatic switch included for each channel of a remote control.

Scroll Up